Challenge
jogger, 22 x 26 table |
Very
good |
$100.00 |
Challenge
jogger, 14 x 20 table |
Very
good |
$75.00 |
3/4"
Steel banding, cart, band, crimp clips, tensioner & crimper tools |
All
new, nearly whole roll of steel banding left |
$400.00 |
Challenge
single head paper drill, with 3/16", 1/4", 3/8" &
1/2" drills |
Very
good |
$200.00 |
Lasco
table top Model CR50B corner rounder with 1/4" radius die |
New |
$200.00 |
Lasco
table top Model 20 corner rounder with 1/8" radius die |
Like
New |
$75.00 |
48
x 96 work table with full under shelf |
Good |
$50.00 |
48
x 96 work table on HD casters |
Good |
$50.00 |
"Hot
Wire" plastic letter cutter |
Excellent |
$25.00 |
GBC
F-60 Laminator, 64", hot/cold, 3 supply, 1 rewind To
see picture, click here. |
Very
Good, low use |
$6,000.00 |
Pro-Tech
Orca I Laminator, 54", hot/cold, 3 supply, 2 rewind. Includes
Jun-Air compressor.
To see
picture, click here. |
Very
Good |
$6,000.00 |
GBC
6036 Laminator, 40" thermal 2 side only |
Excellent
mechanically and esthetically |
$2,000.00 |
GBC
6036 Laminator, 40" thermal 2 side only |
Excellent
mechanically, esthetically fair |
$600.00 |
GBC
6036 Laminator, 40" thermal 2 side only |
Excellent
mechanically and esthetically, electronics bad |
$75.00 |
GBC
2300 Autofeeder, feeds 7 x 9 to 26 x 40 sheets, rebuilt professionally |
Excellent,
has an added blower compressor |
$1,000.00 |
Doculam
18" Deluxe HD laminator with new rollers |
Excellent |
$300.00 |
Autofeeds
MTC80 laminate cutter, with variable speed exit conveyor, extra blade
set |
Very
good mechanically, esthetically fair |
$2,000.00 |
A22
Standard/Borg Collator, Dual 22 bin (20 functional), with descending,
offsetting stacker |
Excellent
mechanically and esthetically |
$800.00 |
10" Ryobi table saw with
router attachments
|
Excellent |
$200.00 |
D&K
Doublekote 27" laminator only, needs rollers, but works okay |
Worn
but usable |
$50.00 |
Chandler/Price
26-1/2" Craftsman hydraulic guillotine paper cutter |
Very
good |
$800.00 |
RotaTrim
Technical 72" rotary cutter with stand |
Very
good |
$300.00 |
Fletcher
3000 Panel and glass cutter, 60" tall capacity |
Very
good |
$300.00 |
Dahle
17" rotary trim board |
Very
good |
$25.00 |
Ingersol-Rand
3 HP, 11.3 CFM, 90 PSI air compressor with 60 gallon upright tank |
Excellent |
$250.00 |
Snyder
"Self Piercing" grommet setter with 3/8" & 5/8"
ID dies and 3/8" long & short grommets and 5/8" short
grommets |
Like
New |
$400.00 |
60"
x 120" work table on HD casters with HDPP top for blade cutting,
two shelves below for storing cases of Fome Core product |
Excellent |
$350.00 |
60"
x 120" work table on HD casters with HDPP top for blade cutting,
two shelves below for storing cases of Fome Core product |
Excellent |
$350.00 |
48
x 120 work table with 36 x 96 lower storage shelf, on casters |
Very
good |
$75.00 |
48
x 96 HD work table |
Good |
$30.00 |
48
x 96 HD work table |
Good |
$30.00 |
48
x 48 HD work table |
Good |
$15.00 |
48
x 96 HD work table |
Good |
$30.00 |
48
x 96 HD work table |
Good |
$30.00 |